CM纸模网

标题: 1:33 GPM - Ryan FR1 "Fireball" [打印本页]

作者: Technick 时间: 2017-6-30 23:35
标题: 1:33 GPM - Ryan FR1 "Fireball"
本帖最后由 Technick 于 2017-7-1 03:14 编辑

你好
这是我目前的模式. 驾驶舱照片

作者: Elarrow 时间: 2017-7-1 07:00
我去！也是个高高手，

作者: ap93061 时间: 2017-7-1 22:22
well done

作者: YZY 时间: 2017-7-1 23:09
Amazing . Thank you for visiting our site. We wonder learning something from you.

作者: 353520225 时间: 2017-7-2 00:57
楼主做得这么干净，很容易没朋友的

作者: ericdd365 时间: 2017-7-2 09:36
非常厉害

作者: Technick 时间: 2017-7-2 17:42
本帖最后由 Technick 于 2017-7-2 17:59 编辑

我很高兴你喜欢它

下一张照片:

硅胶前:

硅

环氧树脂

第二版

发动机

作者: azure 时间: 2017-7-2 20:34
这是拿什么做的模子？

作者: xiafan1989 时间: 2017-7-2 21:07
本帖最后由 xiafan1989 于 2017-7-2 21:10 编辑

能拜师吗？

作者: ice 时间: 2017-7-2 21:42
Amazing work!!!

作者: ice 时间: 2017-7-2 22:08
Can you publish some more pics of your compositions here, please?
My friends & I all like your work very much. ^.^

作者: werjuam 时间: 2017-7-2 22:41
unbelievable!

作者: haohaode 时间: 2017-7-3 09:11
倒模都用上了？厉害！

作者: Technick 时间: 2017-7-3 16:41
圆顶

我在双方切割圆顶。它将更容易成型和胶合。

简单的工具。由环氧树脂制成。

在边缘上涂胶，然后按工具（我使用玻璃）。边缘很适合

将零件粘合到圆筒上。

作者: 懒人 时间: 2017-7-3 21:53
楼主很有一套

作者: super牛肉 时间: 2017-7-4 09:36
做的真工整！

作者: t54 时间: 2017-7-4 11:20
The engine is amazing !

作者: mozx123 时间: 2017-7-4 22:15
发动机罩好有形，大赞

作者: sugarcane 时间: 2017-7-5 09:50
I like your work very much too

作者: 瀚海 时间: 2017-7-31 11:51
这技术……没得话说啊，咋一下这么多假洋鬼子

作者: bararabo 时间: 2017-8-7 10:30
Amazing. Nice work.

作者: chen_btsn 时间: 2017-8-21 13:22
牛逼大发了呀。。。哈哈，不我信老外用翻译软件能翻译这句话，哈哈。

作者: Technick 时间: 2017-8-31 01:36
瀚海, 我为什么要说谎我的国籍？

chen_btsn, 我知道翻译不完美.

有更多的照片. 自制泡沫切割机:

整体看

祝你今天愉快

作者: mozx123 时间: 2017-8-31 21:15
真厉害，给大家提供了好多新的参考

作者: ap93061 时间: 2017-8-31 21:39

Technick 发表于 2017-8-31 01:36
瀚海, 我为什么要说谎我的国籍？

chen_btsn, 我知道翻译不完美.

wow，非常结实的机体和机翼

作者: chen_btsn 时间: 2017-9-1 08:13
哈，调侃翻译软件是玩笑
这个工艺实在太牛逼了，我这个阑尾王都想有动工的冲动了呢

作者: qililhjcn 时间: 2017-10-27 10:26

azure 发表于 2017-7-2 20:34
这是拿什么做的模子？

必须是硅胶啊。。。。。。。

作者: crztang 时间: 2017-11-2 17:03
O,MY.....really amazing work.learning!

作者: mark1405 时间: 2017-11-9 17:31
这技艺整的真是没话说！佩服了。

作者: ferrarifan 时间: 2017-12-5 12:32
这种制作手段，让我大开眼界！

作者: zhanghu1977 时间: 2017-12-12 22:30
真厉害！惊得我一愣一愣的！！！！！！

作者: sugarcane 时间: 2017-12-14 12:39
沃草，这是我见过最好的飞机蒙皮了

作者: POLLONG 时间: 2017-12-18 13:16
请继续更新啊！

作者: 云海之间 时间: 2018-1-6 16:08
看着真是享受！

作者: Technick 时间: 2018-6-21 02:40
Hello again

It has been a while. I don't know the reason but I couldn't upload any photos for a long time. Problems has gone

and I can finally show you build progress. Enjoy

Cutting those tiny parts and holes was quite challenging

All parts attached together

Have a nice day

作者: ferrarifan 时间: 2018-6-21 11:27
The design of these joints is so complex that cutting such thin parts is unthinkable. Exclamation！

作者: wingofsilver 时间: 2018-6-21 12:06

Thank you for posting! Beatiful work!

作者: Kyo 时间: 2018-6-21 13:52

他来自赛博坦星球

作者: syshang 时间: 2018-6-21 14:01
Never see things like this before... Really fantastic build!
Some questions:
1. What is the material used to fill up spaces between the keel and the skin? (Is it soft or hard?)
2. The joint of 2 skin parts at the top-front of the vertical tail (you highlighted it in the picture) - how do you manage to have such a smooth result? Could you share the skill used for it?

Thanks~

作者: 手心工厂 时间: 2018-6-21 18:08
Welcome back! Master!

作者: Technick 时间: 2019-9-28 08:39
Hello!

I'm sorry for being quiet for so long. I couldn't upload any photos and write on this forum for a very long time due to technical problems. Model is already finished but it will take some time to upload all photos. Today I 'll just show some of them

Syshang:

1. I used styrofoam XPS to fill those spaces. It is light, easy to cut and sand.
2. I use bent wire to shape it up. It's hard to explain so I'll try to make some photos of this process.

Shooting sight

Rockets

Wings

Have a nice day

作者: ap93061 时间: 2019-9-28 22:12

Technick 发表于 2019-9-28 08:39
Hello!

I'm sorry for being quiet for so long. I couldn't upload any photos and write on this foru ...

perfect!!!!!!!!!!!!!

作者: wingofsilver 时间: 2019-9-28 22:27
(๑•ㅂ•́)و✧ Awesome work! Thank you for updating! Please do share more of your finished models (if there is)!

作者: ferrarifan 时间: 2019-9-28 22:29

Technick 发表于 2019-9-28 08:39
Hello!

I'm sorry for being quiet for so long. I couldn't upload any photos and write on this foru ...

The results are as amazing as ever! The technical problems you had, was it Poland that built the other Great Firewall??

作者: Technick 时间: 2019-9-29 01:50
ap93061, thank you

wingsofsilver, thanks! I have other two finished models but its quality is not that good as in the newest ones.

ferrarifan, not sure what caused those technical problems but I'am glad that they're gone. Finally I can share my work with you guys

Here are more pictures. Fuel tank, bomb and rockets

Propeller

Have a nice day

作者: syshang 时间: 2019-9-29 08:23
Thanks for sharing such great build and sophisticated skills! I think I really need much more time to exercise…

作者: ferrarifan 时间: 2019-9-29 09:42

Technick 发表于 2019-9-29 01:50
ap93061, thank you

wingsofsilver, thanks! I have other two finished models but its quality is ...

What material is the propeller hub made of? It doesn't look like paper at all. The blade of the propeller has a change in curvature, which is what I always hoped for. It’s amazing.

作者: ninenine 时间: 2019-9-29 15:16
I saw a lot of works with a desire to make, and the style of academics.

作者: Technick 时间: 2019-9-29 15:45
syshang, take your time and always ask yourself "how can I improve? How can I do it better?". It really boosted my skills

ferrarifan, proppeler hub is made of thin printing paper. It was wrapped tight around steel rod and covered with a cyanoacrylate glue to harden it. Then I mounted it on drill and sanded it out.

About this proppelers blade twist. I always glue leading edge first with elastic glue such as PVA glue (white waterbased glue used by carpenters) so it won't crack while changing curvature. Then I twist blade in my fingers and glue trailing edge in small sections (5mm at once). Two halves rarely fit perfect so I have to cut visible surplus at the end.

ninenine,

作者: Technick 时间: 2019-9-29 17:52
More photos

作者: ferrarifan 时间: 2019-9-30 12:38

Technick 发表于 2019-9-29 15:45
syshang, take your time and always ask yourself "how can I improve? How can I do it better?". It rea ...

Hi Tecknick, Thank you very much for your detailed answers, which is very helpful for me to improve my skill. I will try your method in the next model making process. Of course, it must be a piston aircraft

作者: Technick 时间: 2019-10-1 15:49
ferrarifan, I can't wait to see results!

Last update before gallery.

Wheels

Canopy

I used liquid mask to cover canopy before varnishing

作者: Technick 时间: 2019-10-3 22:43
Finished model

I also created short movie on Youtube:

https://www.youtube.com/watch?v=1JraMirnnO4

Have a nice day

作者: 牧师 时间: 2019-10-4 22:10
Technick的制作可以作为学院派的学习案例，征得他的同意，我将他的制作教学视频将上传到国内平台供大家学习。

作者: ferrarifan 时间: 2019-10-8 14:29

Technick 发表于 2019-10-1 15:49
ferrarifan, I can't wait to see results!

Last update before gallery.

Hi Technick, did you spray flat paint on it before it was finally finished? In addition, I don't understand what your canopy mold is made of plaster cast. I don't fully understand its use. Can you provide more detailed explanation?

作者: syshang 时间: 2019-10-9 15:05
Fantastic build! Ryan FR Fireball is not a quite successful aircraft of its era, but your build is really beautiful and definitely a great success!

作者: zhangzhiyi 时间: 2019-12-2 11:02
牛

作者: 小飞鱼 时间: 2022-3-1 16:48
you are veryveryverynice

欢迎光临 CM纸模网 (http://www.cardmodel.cn/)