设为首页收藏本站

CM纸模网

 找回密码
 马上注册(Reg)
遇到账户冻结的用户请申请验证, 管理员会在后台审核通过后就可以登陆。 如果账户解冻或者密码遗忘遇到问题, 请发mail到474372757@qq.com
搜索
查看: 25848|回复: 40
打印 上一主题 下一主题

[SYCM-A01 1:33] CAC FC-1 枭龙 / PAC JF-17 Thunder [Alpha 1]

[复制链接]
跳转到指定楼层
1
发表于 2020-4-16 13:35:49 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
在2020年已经发生或者将要发生的诸多事件中,肆虐全球的新型冠状病毒疫情可能是影响最为深远,给人们留下的印象最为深刻的。在对抗病毒的战争中,世界各地的医务工作者付出了巨大的努力,也负担了沉重的牺牲。其他人所能做的除了守望相助,就是闭门在家,减少疫情传播的风险。

如果你此时正待在家中,希望给自己找些有趣的事情来做的话,模型绝对是一个好选择。在此,我将这个尚未全部设计完成的纸模型分享给大家,希望在疫情期间给大家带来一些乐趣。


                               
登录/注册后可看大图


模型比例为1:33,现在设计完成并开放下载的只有龙骨,起落架和座舱,其他部分如机身蒙皮、座舱罩、外部细节尚未完成全部设计。如果你喜欢这一设计并且想要完成整个模型,请在机身龙骨的空白处写上你的Email,完成机身龙骨、起落架和座舱的制作并为它拍照(照片应该能看到已完成部分的全貌和清晰的Email,也可以将Email写在另一张纸上,和模型一起拍照),将照片发送至syanshang@gmail.com,我会在其余部分设计完成后将图纸发送给你。请注意:这一免费策略仅在一段时间内有效,即:

  • 新冠病毒疫情期间
  • 本模型完成全部设计之前

免费策略的实际截止时间以本贴通告或工作室网站(https://ascendingjoy.wordpress.com/)通知为准。
完成的部分应该如下图所示:


                               
登录/注册后可看大图


下载:
Google

https://drive.google.com/open?id=1wq5Th5lj_Cz4l8DQZ62qbmsKy6lEW6rd
百度
链接:https://pan.baidu.com/s/1lvmKJ_RbiRKqw0dYiHrkFQ
提取码:m5kd

推荐
发表于 2020-4-18 00:28:29 | 只看该作者
39
 楼主| 发表于 2021-1-22 14:42:59 | 只看该作者
rc119 发表于 2021-1-22 11:23
没得下载了?
怎么回事?

因为被厂家收购用于商业销售了,停掉下载厚道一些。
38
发表于 2021-1-22 11:23:06 | 只看该作者
没得下载了?
怎么回事?
37
 楼主| 发表于 2020-9-23 10:30:47 | 只看该作者
wingofsilver 发表于 2020-9-23 00:28
避免合同问题大大记得关闭下载删除载点~

多谢提醒 现在只保留了说明书和武器挂载的零件,其他下载都去掉了
36
发表于 2020-9-23 00:28:06 | 只看该作者
避免合同问题大大记得关闭下载删除载点~
35
 楼主| 发表于 2020-6-27 15:34:32 | 只看该作者
takcoud 发表于 2020-6-27 00:42
Hello!

You are right.

Hi,

Yes, the build process should be in a seperate thread, under
航空区(Airplanes) › 航空模型制作进行区(Construction Reports)

http://www.cardmodel.cn/forum.php?mod=forumdisplay&fid=12
34
发表于 2020-6-27 00:42:09 | 只看该作者
本帖最后由 takcoud 于 2020-6-27 00:44 编辑
Thanks for trying out my work. There're several peoples around the world working on it too, however there's no such printing issue reported before. I also tried to print it before release to the public and everything was fine.

It is designed to be opened and printed by Adobe Acrobat Reader. I did not try to print it directly with Adobe Illustrator, maybe you should use Acrobat.


What is more - the PDF files are protected. Seems you've cracked the file and open it in Illustrator? Please note that this is not allowed.

Hello!

You are right.
I tried different PDF viewers and find out that Acrobat Reader DC and X-Change PDF Viewer show the correct edges.
Before I used Sumatra PDF and it can't show correct picture.

Don't worry about password removing. I don't want to distribute unblocked files.
I made it only for my print. I openly tell you about it.
But you must know that there is open services that easely remove passwords.
Hope you forgive me.

And I want to ask you. May I publish my assembling in this tread or I shoould use new tread in the forum?

P.S. You may use the chinese language. I can easy read the messages via google translate.
China translations very close to russian language. It is quite unusual and nice.

33
 楼主| 发表于 2020-6-26 18:53:35 | 只看该作者
takcoud 发表于 2020-6-26 03:35
Hi all!
I have some troubles when I try print JF-17.

Hi,

Thanks for trying out my work. There're several peoples around the world working on it too, however there's no such printing issue reported before. I also tried to print it before release to the public and everything was fine.

It is designed to be opened and printed by Adobe Acrobat Reader. I did not try to print it directly with Adobe Illustrator, maybe you should use Acrobat.


What is more - the PDF files are protected. Seems you've cracked the file and open it in Illustrator? Please note that this is not allowed.

感谢制作本模型。已经有很多人(包括中国和其他国家)在制作这个模型,但是从没有人报告过这样的打印问题。在这些文件发布之前,我都自己试印过,保证没有问题。

图纸设计的初衷是直接用 Acrobat Reader 打印,所以并没有尝试用 Adobe Illustrator 打印过。同时,我不知道你是如何用AI打开文件的——发布的PDF都有密码保护,请不要试图破解密码。


您需要登录后才可以回帖 登录 | 马上注册(Reg)

本版积分规则

渝ICP备19000475号-1|网安备案号 50010302001681|小黑屋|手机版|Archiver|CM纸模网    

GMT+8, 2024-5-15 04:12

Powered by 重庆上霖医药科技有限公司

快速回复 返回顶部 返回列表