[SYCM-A01 1:33] CAC FC-1 枭龙 / PAC JF-17 Thunder [Alpha 1]

takcoud

Hi all!
I have some troubles when I try print JF-17.

You use too thin detail edges. I open it in Illustrator and find out 0.004mm edges.
It too little for printing. My Epson L800 can't handle this.
I use maximum print settings.
The paper is Kodak Matte Photo Paper 170g.

I had to increase the thickness of the lines
Their thickness is now 0.05mm
I made a comparison.
I think you need to think about the thickness of the lines of the model.

Just look at the pictures.
0.004 is ORIGINAL thikness. 0.05mm is my fix

登录/注册后可看大图

lihaiming

啊这

syshang

takcoud 发表于 2020-6-26 03:35
Hi all!
I have some troubles when I try print JF-17.

Hi,

Thanks for trying out my work. There're several peoples around the world working on it too, however there's no such printing issue reported before. I also tried to print it before release to the public and everything was fine.

It is designed to be opened and printed by Adobe Acrobat Reader. I did not try to print it directly with Adobe Illustrator, maybe you should use Acrobat.


What is more - the PDF files are protected. Seems you've cracked the file and open it in Illustrator? Please note that this is not allowed.

感谢制作本模型。已经有很多人（包括中国和其他国家）在制作这个模型，但是从没有人报告过这样的打印问题。在这些文件发布之前，我都自己试印过，保证没有问题。

图纸设计的初衷是直接用 Acrobat Reader 打印，所以并没有尝试用 Adobe Illustrator 打印过。同时，我不知道你是如何用AI打开文件的——发布的PDF都有密码保护，请不要试图破解密码。

takcoud

Thanks for trying out my work. There're several peoples around the world working on it too, however there's no such printing issue reported before. I also tried to print it before release to the public and everything was fine.

It is designed to be opened and printed by Adobe Acrobat Reader. I did not try to print it directly with Adobe Illustrator, maybe you should use Acrobat.


What is more - the PDF files are protected. Seems you've cracked the file and open it in Illustrator? Please note that this is not allowed.

Hello!

You are right.
I tried different PDF viewers and find out that Acrobat Reader DC and X-Change PDF Viewer show the correct edges.
Before I used Sumatra PDF and it can't show correct picture.

Don't worry about password removing. I don't want to distribute unblocked files.
I made it only for my print. I openly tell you about it.
But you must know that there is open services that easely remove passwords.
Hope you forgive me.

And I want to ask you. May I publish my assembling in this tread or I shoould use new tread in the forum?

P.S. You may use the chinese language. I can easy read the messages via google translate.
China translations very close to russian language. It is quite unusual and nice.

登录/注册后可看大图

syshang

takcoud 发表于 2020-6-27 00:42
Hello!

You are right.

Hi,

Yes, the build process should be in a seperate thread, under
航空区(Airplanes) › 航空模型制作进行区(Construction Reports)

http://www.cardmodel.cn/forum.php?mod=forumdisplay&fid=12

wingofsilver

避免合同问题大大记得关闭下载删除载点~

syshang

wingofsilver 发表于 2020-9-23 00:28
避免合同问题大大记得关闭下载删除载点~

多谢提醒 现在只保留了说明书和武器挂载的零件，其他下载都去掉了

rc119

没得下载了？
怎么回事？

syshang

rc119 发表于 2021-1-22 11:23
没得下载了？
怎么回事？

因为被厂家收购用于商业销售了，停掉下载厚道一些。

Pioneer111

感谢楼主