1:35 APCM T-84BM Ukrainian Tank

zsq163 · 发表于 2022-8-22 17:19:03

Cool

wingofsilver · 发表于 2022-8-26 18:54:05

Welcome to the forum and nice work on the tank~

Boris · 发表于 2022-8-27 23:05:23

Hello all

Boris · 发表于 2022-8-27 23:15:52

Boris 发表于 2022-8-27 23:05
Hello all

Hello all
Thank you for kind words.
Next is the rear of the hull. Nothing too difficult here, just need to be careful

Boris · 发表于 2022-9-4 13:23:16

Hello all
Mr Slow here:-)
Next step were the side protection panels. Actually, it took me a lot of time to understand how to make and install them. Either the instructions translation was bad, or I am getting older :-)
In the end, everything worked out.

crazy2002 · 发表于 2022-9-4 15:34:34

very good！well done！

Boris · 发表于 2022-9-6 10:11:22

Thank you

haoniao3000 · 发表于 2022-9-17 16:55:41

加油

Boris · 发表于 2022-10-9 05:43:34

Hello all.
A big update this time.
First, the digging-in shovel. Pretty straight forward task.
Then, came the front lights, driver's view periscopes and driver's hatch. Nothing too difficult here, need to be careful with small parts.
Then I began with the turret. Creating the closed box around the reinforcements was quite intricate, but the design is very precise, so, working carefully helps.
Afterwards, I made and mounted the commander and gunner hatches and the formers for top reactive armor plate
For now, I am very happy with the design. Thanks to the designer.

Boris · 发表于 2023-5-7 01:33:44

Hi all. I am back. Advancing with the turret. Had a big problem understanding how to make the smoke mortars covers and combine them with the turret. Took me at least three attempts. Had to be very careful with many edge gluing
Also, I made three ammo boxes for NSVT 12.7 mm turret-mounted machine gun.
So, I need to finish the side bustle rack, the NSVT machine gun and the main KBA-3 to mark the turret done.

		自动登录	找回密码
密码			马上注册（Reg）