|
最终组合。把车轮黏到车轴上。给一边的轮子留出和173的距离。小心的把车体和车架黏在一起。然后如图20所示黏上160.用大约2mm厚的焊线来模拟用尽的“I”形状。<不懂..先这么翻译吧马镫制作到这里再仔细研究下>,图图20所示黏上169和G, F。然后在所有都粘好以后黏上57和C。
Final assembling. Glue wheels to the axles. One of them should be spare wheel and it is set on #173. Carefully set the body on carriage with glue. Now assemble and put #160 (figure 20). Use solder wire (about 2mm thickness) to imitate exhaust “I”.
Glue #169 and G, F on the places you can see on fig.20. After all glue #57 and C.
制作完成啦!
Your work is finished.
如果不喜欢模型有透明玻璃或者不想制作内构的话——你大可以剪张彩色的纸代替。
You may do not make transparent glasses on model – just cut them from colored paper. At this case don’t make interior details. |
|